Mutants

Like everything else, headpins are subject to natural selection. Especially with 28 gauge argentium sterling silver, there are plenty of headpins that get a little wacky. Here are two (three, actually) that didn't make the cut. Not to worry - the scrap will be returned to the metal shop and recycled.

More is more

If you've been keeping an eye on my shop you'd see that I've been adding tons of new styles/gauges of headpins. My goal is to become more of a one-stop shop for headpins (especially sterling silver) because few other sellers on Etsy offer them and I know from experience it can be a pain to amass all the various types of headpins you'll need.

20 gauge argentium - as suggested by a customer. These would be fabulous to bend into earwires - just don't forget to file the ends so they don't slice anyone's earlobes open.

22 gauge argentium - great as earwires for very light earrings or for larger beads.

24 gauge fine silver gauge headpins

...and now any headpin order can be oxidized for a flat fee of $5. I'm seeing a lot of jewelry artists do some amazing work with oxidized metals, so I figured I'd make their lives a bit easier.

So there you have it! More headpins you can shake a stick at.

My very next project is adding 24 gauge argentium headpins...it's a glaring omission I will fix soon.

As always, these headpins (and more!) are available in my shop.

How (not) to make headpins. Part 2: fine silver

Oh my God, making headpins using fine silver is so much easier than argentium. Seriously. I wouldn't even bother with the argentium, but its strength comes in handy for a lot of projects.

Here's the summary of my process for fine silver:

1. Cut wire (I ordered mine from fusionbeads.com) into sections of 1.5 inches - 2.5 inches. You lose up to half an inch when balling the wire, so be careful not to cut it too short.

2. Wave the wire in the general direction of a lit butane torch.

3. Enjoy perfectly formed headpins!

Ok, it's not quite that easy, but...well, it pretty much is. You still need to hold the wire straight up, otherwise the ball will be lopsided. And I noticed that if you heat up the wire too much, not only does the ball get too big, but it turns matte. It's not ugly, but I was going for smaller, shiny balled ends.

The hardest part for me was stopping. I burned through a 75-foot coil of wire like it was no thang, then collapsed all twitchy because I have no more wire left. But hey, I have a great batch of heapins for sale and personal use now!

I also had lots of fun taking artistic pictures of the headpins for Etsy. They're tied with neato hemp string I found at a local stationery store.

Oooh...



Aaahhh....!

By the way, these photos were taken in my ghetto-fabulous photo box, which I will be writing about shortly.

So yeah. I'm not saying my headpins are the best ever, but they pretty much are. Buy them here: [26 gauge, 2 inches long] [1.5-1.75 inches long]

Related: How (not) to make headpins, Part 1

How (not) to make headpins. Part 1: argentium sterling silver

So I got the idea in my head that I should make my own headpins. I'd been ordering them from a wonderful lady on Etsy, but my latest order was delayed (holidays! *shakes fist*), which made me investigate the process.

By Googling phrases like "how to make headpins," I found tons of videos and tutorials. Some - like this one - made the whole process seem like a walk in the park. Some - like this three- part video series - intimidated me (my eyes glazed over around the time she whips out the pickle pot.)

Still, I wanted to at least give it a try.

As it turns out, gathering all the materials was the hardest part.

I hoped to avoid the big-box stores by shopping at my local hardware store for materials, but that proved fruitless. So off to Lowe's I went, in search of the butane torch, fuel, denatured alcohol and boric acid.

Slight digression: I hate Lowe's with a passion. For anyone not schooled in the ins and outs of plumbing, power tools, and other Guy Stuff, it's a perfect illustration of the Needle in the Haystack principle. I wandered and wandered looking for boric acid. The customer service people told me in the Pool department, and waved vaguely toward the back of the store. After looking for it for about 15 minutes, I gave up and went back to customer service. Finally, they told me where it was (outside, as it turns out). And after all that, there was no boric acid in the Pool department (trust me, I scoured the shelves). I ended up finding boric acid at – wait for it- Rite Aid. Sigh.

(Disclaimer: I've never taken a metalsmithing class, and the process described below probably reeks of ignorance and hubris. Follow my lead at your own risk.)

I used 24 and 26 gauge argentium sterling silver, since that's what I had on hand. I clipped the wire into 2" sections, then dipped the wire pieces in a 50/50 solution of denatured alcohol and boric acid in hopes of minimizing firescale, but honestly? I don't think it helped at all. It did help me feel all sophisticated and scientific, however.

Firing up the butane torch was thrilling, to say the least. Forming uniform, non-lopsided balls with sterling silver definitely takes technique. It's not difficult, per se, just tricky.

Here's my setup:

Since I'm left-handed, the water bowl sits on the left to the torch. You can see the tip of the cruddy old pliers I used to hold the headpins, as well as a batch of cut wire ready to be zapped.

And yes, that's my kitchen counter. It's the most fireproof section of my apartment, ok?

Afterward I rubbed the blackness off the headpins using the dark green side of a regular old kitchen sponge. Next time I'm at the hardware store I'm going to buy some extra-fine steel wool, but the sponge worked fine.

I skipped the whole process of pickling, tumbling, and all the rest. Does that make me a terrible person? Maybe, but I'd rather just polish the headpins by hand and call it a day.

Here's a shot of my very first batch of completed headpins:

(bonus glimpse of my messy work area in the background!)

They rock, if I do say so myself. Flush with victory, I made this bracelet with them:


Argentium sterling silver is perfect for this type of bracelet, since the metal is stronger than regular sterling, and it never tarnishes.

Truthfully, my homemade headpins look better than sterling headpins I've purchased. The balls are nice and smooth, whereas the balls on the sterling headpins I'd purchased were a bit shriveled looking.

Since my first batch, I've ordered tons more argentium silver wire. I plan on selling some of the resulting headpins on Etsy, since no one else seems to offer them. Yay, headpins!

Stay tuned for Part II: Fine Silver Came Directly from the Gods.

Sources/further reading:
Sterling Silver Headpin Tutorial from Silver River Jewelry
Tutorial from Michon Jewelry